How To Make Your Own Dog Toy In 7 Easy Steps!

By Jean Cote | Posts

If you are like me, every time you go pick up some dog food at the local pet store you simply can’t resist the temptation of walking in the dog toy aisle. And you can’t help but notice how cute some of the dog toys are and how much your dog would love one.

But then, you start to remember how your dog chewed up to pieces his last dog toy that you bought him and how it cost you over $20. The last dog toy that I purchased my dog was a fabric tug-toy, it lasted about a week before it ripped and started to fall apart. So for the last two years I have been making my own dog toys, ones that costs a fraction of the pet stores and that are of much higher quality.

In this tutorial, I will show you exactly how to build your own dog toy from materials that can be purchased very cheaply at your local fabric store. There are many different fabrics to choose from and they all have their unique advantages and disadvantages.

When choosing a material for your dog toy, make sure that you test its strength by pulling on each sides and look for rips. Some material will leave fuzz balls or fur all over the your floor. My personal favorite is pool table felt. Usually people will sell their used pool table felt because it is a little bit dirty, so you can purchase those for very cheap, for under $5. A pool table felt will allow you to make several dog toys.

Let’s create your dog toy…

Step 1. Start by cutting three strips the length of the fabric; make them as long as possible. Once the dog toy is finished it will only be about a quarter of the length of the strips.


Step 2. Tie a normal knot at the top of the strips and make sure that it is very tight so that the dog toy doesn’t come apart once it is completed.

Step 3. Take the knot in your hands while the strips are hanging off your hand.

Step 4. Take the strip that is the farthest away (yellow arrows) from you and bring it over towards you. Then take the left strip (blue arrows) and bring it over the middle strip. Then take the right strip (green arrows) and bring it over and under the two strips.

Step 5. Tighten each strip equally and you will have your first knot. The tighter you make your knots the harder the dog toy will be, but if you tighten it lightly, the dog toy will stretch while you tug.

Step 6. Repeat the same thing over and over until you have the desired length. Above is a picture of a few knots done in a row.

Step 7. When you are finished, complete the dog toy by doing a final knot at the end. The final knot is exactly like be beginning knot. There are alternative patterns to knot your dog toy so that it goes in a spiral. I will write more tutorials in the future.

Here are two pictures of my dog Chase tugging with hew new dog toy. She really loves it!

Have fun with this! Experience with all sorts of different materials and lengths! Share your thoughts and comments below…

About the Author

Jean Cote is an animal lover and the founder of the Dog Trick Academy. For more than a decade, he has served as a coach to thousands of dog owners around the world to better train, communicate and forge a stronger bond with their dog using positive and force-free training methods.

  • Breanabjork says:

    how do you make them with 4 strips of fleece?

  • cat food says:

    If your dog is obsessed with dissecting toys to remove the squeakers, only give him squeaky toys when you can supervise.

  • >